NOVAWINCH HEN Series 10,000
If your job won't wait on an unreliable winch, the Novawinch hydraulic winch is the workhorse you need. Built to satisfy the most demanding commercial or toughest industrial applications. Perfect for recovery & rescue operations, heavy-duty flat-bed trailers, and crane applications the Novawinch HEN Series meets EN14492-1: 2006 and SAE J706 requirements.
If your job won't wait on an unreliable winch, the Novawinch hydraulic winch is the workhorse you need. Built to satisfy the most demanding commercial or toughest industrial applications. Perfect for recovery & rescue operations, heavy-duty flat-bed trailers, and crane applications the Novawinch HEN Series meets EN14492-1: 2006 and SAE J706 requirements.
If your job won't wait on an unreliable winch, the Novawinch hydraulic winch is the workhorse you need. Built to satisfy the most demanding commercial or toughest industrial applications. Perfect for recovery & rescue operations, heavy-duty flat-bed trailers, and crane applications the Novawinch HEN Series meets EN14492-1: 2006 and SAE J706 requirements.
STANDOUT FEATURES
125% - Tested to 125% of rated line pull.
x1.5 – Extra room between tie bars and drum – 1.5 x rope diameter
2X – First layer of wire rope breaking strength is at least 2x of winch rated line pull.
DUAL Drum Holes – two wire rope mounting holes on the drum for secure rope-drum connection.
| SPECIFICATION | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | First layer line pull | First layer line speed | Working pressure diff. | Oil flow supply | Gear ratio | Wire rope dia. | Layer | Wire rope capacity | |||||
| lbs | kg | fpm | mpm | psi | MPa | l/min | inch | mm | ft | m | |||
| HEN10000 | 10000 | 4540 | 19.7 | 6 | 1885 | 13 | 60 | 16.9:1 | Φ13/32″ | Φ10.3 | 4 | 98.4’ | 30 |
| Model | HEN10000 | |||||
|---|---|---|---|---|---|---|
| Layer of cable | Rated line pull per layer | Line speed | Wire rope capacity per layer | |||
| lbs | kg | fpm | mpm | ft | m | |
| 1 | 10000 | 4540 | 19.7 | 6 | 22’ | 6.7 |
| 2 | 8296 | 3763 | 23.6 | 7.2 | 47.6’ | 14.5 |
| 3 | 7088 | 3215 | 27.6 | 8.4 | 75.8’ | 23.1 |
| 4 | 6188 | 2807 | 31.5 | 9.6 | 98.4’ | 30 |
| Model | Weight | |
|---|---|---|
| lbs | kg | |
| HEN18000 | 110 | 50 |
| PNEUMATIC CLUTCH | |
|---|---|
| Air pressure range（bar） | 1~8 |
| Ventilation volume（L/min） | 1 |
H-EN Valve Options:
NF-060 P2 Y2 S1-002
WARNING:
1. Do not use a winch for hoisting people or hoisting objects above people.
2. Do not use clutch under load.
3. Do not plumb winch into an oil supply system without a relief valve.
NOTE:
1. Recommended oil flow supply range is 40-90 l/min.
2. Dual balance valves as standard, winch must be used in Independent oil supply system which with relief valve.